Each hoist on a Travelift is independently operated.
The Mi-Jack Travelift acts as an overhead crane both inside the building and outside in the yard.
The Auxiliary Hoist is used to rotate product with limited stress put on the panel.
This Travelift Model MJ150 can lift product that is 120ft. long and up to 150 tons in weight.
This special attachment allows customers to lower one end of the product to prepare it for shipping.
These two Travelifts have a combined capacity of 300 tons and can lower product to a barge 40' below grade.
Customized dimensions are used to ensure this customer can do all the jobs required of the Travelift.
This Travelift Model MJ50 is equipped with Air Conditioning.
All Mi-Jack Travelifts come standard with 90 degree pivot steering.
Optional Ladders and Platforms can be used for routine maintenance.
Optional riders platforms available for large yards with ground personnel.
Used and Rebuilt machines are available.
The auxiliary hoist is used to rotate product up to 90 degrees.
Taking full truck loads from storage to shipping will drastically reduce your shipping cycles.
The Travelift is designed to handle the roughest of yard conditions.
Storing product vertically can increase available storage space and selectivity up to 500%.
Each hoist can be independently operated.
Customized spreaders available for handling long products.
This Travelift Model MJ70 is used to maximize storage height while minimizing the required aisle way space required.
These two Travelifts work in tandem for a combined life capacity of 352 tons.
High rise cabs improve visibility throughout the entire shipping area.
This Travelift Model MJ100 can pick and carry 200,000lbs.
These two Travelifts, Model MJ70, have a capacity of 280,000 lbs.
Dual tired cranes with large capacities help minimize the overall ground bearing pressure.
This Travelift is equipped with a spreader with 4 moveable pick points.
This Travelift Model MJ50 is equipped with inward facing cab with 180 degree swivel seat.
This Travelift Model MJ50 is equipped with a spreader bar designed to equalize the load on all four of it's picking points.
This Model MJ30 Travelift acts as a overhead crane both inside the building and out in the storage yard.
Customized dimensions, optional rails wheels, and remote control enable this customer to load products out in tight clearances.
Mi-Jack Travelift Model MJ30 can pick and carry it's capacity of 60,000lbs.
These two Mi-Jack Travelifts, Model MJ70, handles product in tandem.
Optional high rise cab for improved visibility over tall product.
The Auxilliary Hoist is used for rotating products up to 90 degrees.
Optimized storage area and total product selectivity are just a few benefits of the Travelift Model MJ100.
This Travelift was modified with column inserts to meet the customer's height requirements.
This Travelift Model MJ70 is equipped with an Autospreader to eliminate the need for ground crew climbing product.
The Travelift maintains maneuverability while handling product in tandem.
This Travelift MJ100 uses dual trolleys to handle wide product up to 200,000lbs.
A customized spreader design eliminates dual trolley requirements.
This Travelift Model MJ100 crane is equipped with dual trolleys for handling wide, awkward loads.
Snow and cold weather pose no problem.
This Travelift Model MJ150 is designed with dual tires to reduce ground bearing pressure
This MJ150 can handle product up to 120' long with it's specially designed spreader bar.
Due to limited aisle space, this machine uses GPS steering which allows the operator to focus on his direction of travel and assures the product will not be damaged due to operator error.
This Travelift Model MJ30, equipped with a specialized spreader bar, can lift up to three concrete poles at once, increasing the productivity and truck turn around.
Each hook is rated at half the machine capacity and can double productivity when used independently of each other.