These Travelifts Model MJ70 are equipped with rails wheels and straddle live traffic.
This machine was built with rail wheels and rubber tires with one set of columns shorter to accommodate this bridges work area.
These two Travelifts are capable of lower product below grade.
These two MJ150 Travelifts can lift 600,000lbs combined.
The two machines were built with very short hook heights in order to avoid overhead obstructions along the crane path.
With only 5’ aisleways required for the crane travel this customer minimized lane closure requirements.
This MJ70 was used to build this bridge in Florida.
This MJ70 is preparing a barge full of product to be moved to the bridge site.
This machine was used for setting beam, moving equipment, and laying out rebar to build this bridge.
Rental Purchase options are available.
This shows the minimum amount of aisle way required for a Travelift to travel.
Each Hoist is operated independently of each other.
This machine was outfitted with GPS steering to take the operators concern off of steering and focused on the handling of the product.
This is a MJ70 Travelift equipped with optional inward facing cab and air conditioner.
Two Travelifts are able to straddle a truck lane and load the product directly to its final destination.
This MJ40 Travelift was built with rail wheels for loading out barges full of product.
This machine was built with a 78’ Inside Clear width and 100,000lbs capacity to fill in the gap of these two highways.